Pictorial Planet
Please become a Patreon of my work. You get special videos just for Patreons. You also support my website and YouTube work. Just check out the two tiers and decide what you might want as value benefits. Just click the link below…
6 Great Tips to using Fixer with Film
NEW!!!
Subscribe now to my new YouTube channel for tricks and tips on developers, darkroom work and photography.
Subscribe to our new newsletter!
5 Tips for Using Fixers with Film
When I first developed films and paper, I was eight years old. My father showed me what to do and explained that you fix the film for two minutes. Then, when I processed the paper he had me fix it for two minutes also! That seemed easy enough right? But little did I know there was a lot more to it. I was only scratching the surface of fixing. So today I pulled together a few of my favourite tips for you guys!
Tip 1: Dilute fix for film and paper differently.
Film and paper use very different amounts of silver halide in their emulsion film having around 5 times more density of halide crystals than paper *. It makes sense then that in order to remove the undeveloped silver halides in film you need a stronger fixer. Film also contains the halide silver iodide, the hardest of the halides for the fix to remove. This again necessitates a much stronger fix solution to remove. A strong fix solution has a mild bleaching effect that can spoil the delicate highlights in paper if left for too long. Using a weaker solution with paper helps mitigate that bleaching effect. Therefore, use fix for film at 1+4 and fix for paper at 1+9.
* http://www.cheresources.com/content/articles/other-topics/chemistry-of-photography?pg=3
Chemistry of Photography - Chris Haslego
Tip 2: Never reuse a film fix for paper.
Some people want to use the same batch of fix for film for the paper! Be warned, it might seem to work, but it is unwise. Film, due to the approximate 5 times higher concentration of silver halides in the emulsion creates much more dissolved byproducts* (especially the difficult to fix silver iodide that is present in film but not paper **). These dissolved halides (not to mention dyes used in film emulsions) can ultimately stain paper or seriously reduce its archival quality. This might not happen straight away, leaving you with a false sense of security, but sometimes years down the line it'll bite you. Keep your fix batch for film separate from your fix batch for paper. Never fix more than the makers capacity (see the fix instructions).
* Post Development Processing
©Copyright 1998 by Dr. Michael J. Gudzinowicz
https://www.photo.net/discuss/threads/why-two-step-fixing-is-a-really-good-thing.93389/
** "All of our papers are coated with emulsions consisting of crystals formed from a mixture of silver chloride and silver bromide (referred to as chloro-bromo emulsions).
Our films use emulsions consisting of crystals that are a mixture of silver bromide and silver iodide (iodo-bromo emulsions)."
https://www.ilfordphoto.com/faqs/photographic-paper-faqs/
Tip 3: Don't use hypo with modern films.
Back in the day we used sodium thiosulphate or "hypo" to fix film and paper. But, in those days film was different, simpler, and hypo could do a great job. Modern T-grain films such as Ilford Delta and (especially) Kodak T-Max need a more powerful fixing agent to dissolve out the higher amount of the Iodide halides. The older hypo struggles and instead we would be wise to use ammonium thiosulphate. The modern so called 'rapid' fixers use this chemical. So, if you are using older films like Ilford FP4+, PanF+, HP5+ or Kodak Tri-X, and you want to make your own fix cheaply, you can use the sodium fix, otherwise go with the rapid fixers. Oh, the older hypo fix does a fine job with paper which has changed little over time.
Tip 4: Use alkaline or neutral fixers for staining developers.
I use pyro and pyrocatechin staining developers such as PMK, Pyrocat-HD and 510-Pyro. They always put a smile on my face whenever I print negatives with beautiful high tones. These high subtle nuances are difficult to obtain with normal metol based developers. The quality of the high tones is due to the delicate stain left by the developer on the negative. This stain is crucial to the advantages of these pyro developers. Acidic (or what you might call normal) fixers reduce this stain. Therefore use a neutral or alkali fix like TF-2, TF-3, or TF-4. I give two formulas in my book to help.
Tip 5: Alkaline fix = Archival photographs.
I encourage all my darkroom friends to use an alkali fixer for their work whether they use staining developers or not and I favour its use for paper fixing. This is because alkali fixers wash out of the film and paper emulsion much more readily therefore supporting archival quality. Any fix that is not washed from the negative or paper will, with time, leave unsightly stains and ruin the photograph. I, for one, want my photographs to last a long time so archival permanence is important. No brown and unsightly stains on my negatives or photographs! Alkaline fix is the rule of the day. I hope it is for you too!
Tip 6: Fix film for twice the clearing time.
Fix can remove the silver in film. Grant Haist in his book Modern Photographic Processing Volume 1 Page 564 states:
It might seem advisable to fix films for much more than twice the time to clear in an effort to insure complete solubilization of the silver halide or the silver thiosulfate complex. Long immersion times in a fixing bath, however, must be avoided, especially with photographic papers. Long periods of immersion of a photographic material in an acid hardening fixing bath may result in the thiosulfate or silver thiosulfate becoming so strongly bound to the gelatin of the emulsion layer, or the paper fibers of a photo paper, that washing will not remove these thiosulfates. Another danger of long fixing-bath immersions is the direct attack on the silver image by the combination of oxygen and the acid fixing bath. It is believed that oxygen from the air dissolves in the fixing bath and attacks the very finely divided silver particles of the image. Oxygen converts these metallic silver particles to silver ions by removing electrons. The silver ions are then complexed by the thiosulfate and removed, resulting in a loss of image silver. Fine-grained film and paper images are especially susceptible to image reduction by acid thiosulfate solutions.
I therefore encourage fixing the film for twice the clearing time, even with alkaline fixers. To do this, after stopping the film, empty the stop bath and add the fresh fix. Now agitate gently for 30 seconds. Open the film developing tank and inspect your film. If there is any milkiness continue to dunk the film gently in the fixer until the milkiness has gone. This total time, from adding the fresh fix to the film clearing is the 'clearing time'. Now, continue fixing for the same amount of time again.
For those worried that their fixer is aging, use three times the clearing time. Any more that three times is unnecessarily risky and should be avoided.
Fix exhaustion: When your fix takes twice as long to clear the film as it did when fresh it's time to change it for fresh.
John Finch
Pictorial Planet